Ernicrmo-15 welding wire is actually inconel 625 filler metal with age-strengthening capabilities. After post-weld heat treatment, it has the same excellent corrosion resistance as inconel 625 filler metal, and has higher strength and hardness. The oil field application environment requires that the stress relief temperature range of low alloy steel (such as aisi 4130) and the age strengthening temperature range of inco-weld 725ndur filler metal are consistent.
Specifications | In stock, can be customized according to customer requirements |
Form | Wire |
Classification | Nickel Chromium Molybdenum |
Welding wire diameter and allowable deviation: unit is millimeters
Package style | Welding wire diameter | Allowable deviation |
straight strip | 1.6、1.8、2.0、2.4、2.5、2.8、3.0、3.2、4.0、4.8、5.0、6.0、6.4 | ±0.1 |
Welding wire roll | +0.01 -0.04 | |
100mm and 200mm diameter wire spools | 0.8、0.9、1.0、1.2、1.4、1.6 | |
270mm and 300mm diameter wire spools | 0.5、0.8、0.9、1.0、1.2、1.4、1.6、2.0、2.4、2.5、2.8、3.0、3.2 | |
Note: Welding wires of other sizes, deviations and packaging forms can be produced according to the agreement between the supplier and the buyer. | ||
When used for manual filling wire, the allowable deviation in diameter is ±0.1. | ||
Relaxed diameter and lift distance of welding wire: unit is mm
Wire spool diameter | 100 | 200 | 270,300 |
Relaxed diameter | 60~380 | 250~890 | 380~1 300 |
pitch | ≤13 | ≤19 | ≤25 |
Welding wire packaging quality:
package style | Dimensions mm | Net mass kg |
straight strip | 一 | 2.5、5、10、25 |
Welding wire roll | a | 10、15、20、25 |
Wire spool specifications | 100 | 0.3、0.5、1.0 |
200 | 2.0、2.5 | |
270、300 | 5~12 | |
Note: Welding wires of other net qualities can be packaged according to negotiation between the supplier and the buyer. | ||
The size of the welding wire coil is determined by negotiation between the supplier and the buyer. | ||
Grade | C | Mn | Fe | P | S | Cr | Cu | Si | Ni | Co | Mo | v | w | other |
Typical value | 0.002 | 0.3 | 2.5 | 0.009 | 0.003 | 20.69 | 0.11 | 0.05 | balance | 1.50 | 13 | 0.12 | 3.40 | 0.12 |
standard value | ≤0.015 | ≤0.5 | 2.0-6.0 | ≤0.02 | ≤0.010 | 20-22.5 | ≤0.50 | ≤0.008 | balance | ≤2.5 | 12.5-14.5 | 0.35 | 3.0-4.5 | ≤0.50 |
ernicrmo-14 welding wire is mainly used for welding duplex stainless steel, super duplex stainless steel, super austenitic stainless steel, inconel c-276/626/625/686 alloy and nickel alloy. For example uns n06059/n06022 nickel alloy.
Ernicrmo-14 welding wire can also be used to form a corrosion-resistant protective surfacing layer on the surface of some steel types. The high alloy composition (cr+mo+w) of the welding wire improves its ability to resist pitting corrosion, crevice corrosion and conventional corrosion, and can withstand the erosion of many corrosive media, such as hydrochloric acid, sulfuric acid, chlorine oxide solution, concentrated hot Chlorine-containing acidic solutions, etc.; at the same time, it also has good resistance to intergranular corrosion and intergranular corrosion after sensitization in a high oxygen concentration environment.
The manufacturing process of stainless steel and alloys involves multiple steps to transform raw materials into flat,rectangular sheets or plates made of stainless steel and alloys. Here are a few key steps for stainless steel and alloys:
Molten stainless steel and alloys are cast into large ingots or billets through a casting process.
During the hot rolling process,the thickness of the steel ingot is gradually reduced and elongated to form long strips or coils.
Annealing involves heating stainless steel and alloys to a specific temperature and then slowly cooling it.
Cold rolling is carried out through rolling mills to reduce thickness to meet customer specifications.
Wuxi Walmay Metal Co,Ltd is a comprehensive processing group of Alloy Steel、Forged Parts Fitting、Titanium Alloy、Stainless Steel、Special Welding Wireseries， and more than 800 specifications.
Our group has been engaged in the domestic and global market for more than ten years with rich steel experience and can offer professional advice for customers inapplications with different materials.
Machine cutting
Sheet cutting
plasma cutting
Dynamic waterjet cutting
sawing
Plank leveling
polishing
laser cutting
laser cutting
production cutting
Long product cutting
Bar and structural cutting
polishing
Heat treatment and annealing: Wuxi Walmay Metal can heat treat certain 400 series stainless steels.
Material Reliability Identification (PMI): Wuxi Walmay Metal can complete this testing in-house.
Ut Testing: Ultrasonic testing (UT) uses high-frequency sound energy to inspect and measure stainless steel products.
Our professional sales team answers your questions within 24 hours.
Wuxi Walmay Metal CO., LTD
EN
AR
FR
DE
RU
ES
ID
